After I have successfully installed the HTK 3.4 in cygwin environment, I follow the instructions in the README and run the instruction
./runDemo configs/monPlainM1S1.dcf
But I don't get the following results,
(雖然成功安裝了HTK3.4在cygwin上,可是按照HTKDemo裡面的說明執行
./runDemo configs/monPlainM1S1.dcf
沒有跑出)
On the training set:
------------------------ Overall Results --------------------------
SENT: %Correct=0.00 [H=0, S=7, N=7]
WORD: %Corr=77.63, Acc=74.89 [H=170, D=37, S=12, I=6, N=219]
===================================================================
On the test set:
------------------------ Overall Results --------------------------
SENT: %Correct=0.00 [H=0, S=3, N=3]
WORD: %Corr=63.91, Acc=59.40 [H=85, D=35, S=13, I=6, N=133]
===================================================================
Instead I get the error messages,
(反而跑出)
Can't open proto at ./MakeProtoHMMSet line 101, <> line 21.
Can't open hmms/hmm.0
I check the README. I found that I don't have the folder "hmms" and "proto" under the HTKDemo. So I create the folder "proto" then run the instruction once again, and then I pass the first error message. Because the instruction "./MakeProtoHMMSet" will create five files, S, C V,N, and L under the "proto" after read the file "lists/bcplist/hmmlist".
(看了readme,發現我根本沒有hmms資料夾和proto資料夾在HTKDemo下,
所以自己建立了proto資料夾後,就順利過了第一個錯誤。
並在proto資料夾產生S, C, V, N, L五個檔案。
因為./MakeProtoHMMSet參考了lists/bcplist這個hmmlist。)
Therefore, for successfully running the demo, I have to create the following folder manually.
(所以,在HTKDemo總共要產生以下資料夾,)
HTKDemo/hmms/ (給HRest用)
HTKDemo/test/ (給HVite用)
HTKDemo/proto/ (給./MakeProtoHMMSet用)
and then,
<然後是>
HTKDemo/hmms/hmm.0/ (給HInit用)
HTKDemo/hmms/hmm.1/ (給HRest用)
HTKDemo/hmms/hmm.2/ (給HRest,HVite用)
Finally, the correct demo message is avaiable.
(如此一來,就可順利得到./runDemo configs/monPlainM1S1.dcf的正確結果。)
16 comments:
if running the ./runDemo configs/monPlainM1S1.dcf is failure,
error message is bad interpreter.
Please update the perl package for cygwin.
Devel: perc:Perl-Compatible Regular Expressions
Devel: perc-devel:Perl-Compatible Regular Expressions
Devel: perl-ExtUtils-Depends
Devel: perl-ExtUtils-pkgConfig
Devel: pkg-config:A utility used...
It should be working.
Thanks for your solution, work like a charm, and save some hours of work.
Here is the Japanese version of notes of running rundemo of HTK.
http://blog.yusukekondo.com/?eid=586128
thank you very much :)
Thanks...quick and easy solution
I've already create hmms, test,proto.....but i have error :
Writing HMMDef to proto/S
Writing HMMDef to proto/C
Writing HMMDef to proto/V
Writing HMMDef to proto/N
Writing HMMDef to proto/L
Calling HInit for HMM S
sh: HInit: not found
Calling HInit for HMM C
sh: HInit: not found
Calling HInit for HMM V
sh: HInit: not found
Calling HInit for HMM N
sh: HInit: not found
Calling HInit for HMM L
sh: HInit: not found
Source Directory Empty hmms/hmm.0
What can i solve it?
To anonymous: I don't know what problem you got. I didn't involve in HTK for a long long time. But I will reinstall all related resource and try to do again.
hello JR.Gemimi !
I installing successfull HTK3.4, but i run HTKDemo, i received some error follow:
HTK Configuration Parameters[3]
Module/Tool Parameter Value
# KEEPDISTINCT FALSE
# SAVEGLOBOPTS TRUE
# TARGETKIND MFCC_E_D
ERROR [+5010] InitSource: Cannot open source file proto/L
ERROR [+7010] LoadHMMSet: Can't find file
ERROR [+2128] Initialise: LoadHMMSet failed
FATAL ERROR - Terminating program HInit
Sorry for my late. Maybe you have solved your problem.
1. Make sure the file proto/L exist.
2. Make sure the authority is right.
Others error may be caused by this error.
Try and good luck.
Thanks JR.Gemini,
your post was very helpful!!
Xie xie ni!
To Ukio, I am glad to help u. I just left the notes when I tired it. It's powerful and have u good experience with it.
I've already create hmms, test,proto.....but i have error :
Writing HMMDef to proto/S
Writing HMMDef to proto/C
Writing HMMDef to proto/V
Writing HMMDef to proto/N
Writing HMMDef to proto/L
Calling HInit for HMM S
sh: HInit: not found
Calling HInit for HMM C
sh: HInit: not found
Calling HInit for HMM V
sh: HInit: not found
Calling HInit for HMM N
sh: HInit: not found
Calling HInit for HMM L
sh: HInit: not found
Source Directory Empty hmms/hmm.0
What can i solve it?
if running ./runDemo configs/monPlainM1S3.dcf msg is
bash: ./runDemo: Permission denied
what can i do?
Please check the permission of binary runDemo.
Using chmod to change the permission of a file.
Thanks for the post. Also don't miss to create the folder "tmp" inside hmm.
HTKDemo/hmm/tmp
Post a Comment